I have some furniture made of pressure treated pine boards that I'd like to stain and finish and make last outside more than 2 weeks.
What is my best course of action here? I was thinking of staining with whatever looks best on a test patch then using a clear marine varnish. Any recommendations or advice from those that have been there? I'd also like to do the application outside to minimize fumes in the house.
If its already pressure treated you don't need to do anything right away. Varnish is a pain in the butt maintenance wise, you've got to recoat frequently and if you leave it too long, you have to strip and sand.
Thompson's water seal applied annually will keep rot at bay. Sand a bit before applying to maintain a smooth surface. Let dry a week before 1st BBQ.
I have an Cedar Adirondack Chair that was very weathered. I disassembled the entire thing, sanded every board, and used two coats of Thompsonís Clear seal on each piece before reassembly. It has held up really well.
I have a cedar deck that I recoat every two years. I use Cabotís semi-transparent on that. It could go longer, but I prefer the appearance of every other year. I pressure wash it one week, and coat the next.
I used Spar Varnish on a brand new Solid Oak door at my old house, really good stuff. All the cheap stuff sold as spar varnish now (Low VOC) is not close to real spar varnish formula. Certainly any big box store stuff isnít. If you go with spar vanish buy Epifanes at West Marine. It not cheap, but itís the real stuff. Double Coats, should last for years.
-------------- ďI went to the woods because I wished to live deliberately...Ē ― Henry David Thoreau
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
Disclosure: As an Amazon Associate we earn from qualifying purchases when you use our link(s).