[Schenk]

I know this isn't a woodworking forum, but maybe someone out there has a small wood lathe they don't want or use any longer. I will be using it for turning fly rod handles/grips.
It has been suggested that I make one with a hand drill and one of the many simple kits out there. No, I would prefer a real lathe with good bearings, a stable base, ability to use a variety of chucks and spurs, and a decent tool rest.
Size? I only need to be able to turn up to 10-12" in length, with most pieces at 7" long
Thanks for checking this out!

--------------
Nature exists with a stark indifference to humans' situation.

[RatherBOutdoors]

Try Seattle Woodturners.  The monthly newsletter often has lathes for sale (the November newsletter includes one that may be a little larger than you want, however).  https://seattlewoodturners.org/newsletters/

[Schenk]

Thanks RBO. I am looking for a used one first, but will buy new if I don't find one.

--------------
Nature exists with a stark indifference to humans' situation.

[RatherBOutdoors]

Just to be clear, I was referring to the want ads in the newsletter which generally feature used equipment

[Schenk]

Ah, gothcha! I'll go back and check again

--------------
Nature exists with a stark indifference to humans' situation.

[Steve]

I've purchased equipment from Equipment Sales and Surplus in the past and they have competitive prices and you can go down to Auburn to check out in person. They frequently post S&D stuff in craigslist but you might go a long time before seeing a lathe.

--------------
Despair is only for those who see the end beyond all doubt.

[Schenk]

Just got back online, thanks Steve

--------------
Nature exists with a stark indifference to humans' situation.